Hi Has anybody any information/advice on the E1 error code on the Hotpoint Mistral FF72s, I have recently replaced the Evaporator Thermistor and one of the thermal Fuses, following the E8 code. F/F is now working but seems to gathering a little frost in the freezer compartment, also freezer temp does not display, just the E1 code.
where do i find the baffle and how do i check if its working? please
macjean
May 2009
Linz,
Thanks for the information re: error Codes.
Much appreciated
Ray Holt
July 2005
E1 - Freezer thermistor open circuit.
E2 - Freezer thermistor short circuit.
E3 - Fridge thermistor open circuit.
E4 - Fridge thermistor short circuit.
E7 - Evaporator thermistor open circuit.
E8 - Evaporator thermistor short circuit.
E9 - Temperature set switch open circuit
EA - No feedback from Baffle
EB - Fridge Baffle motor operating continuously
EE - Defrost time out
Linz
July 2005
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
