I did not line up pulleys properly before changing timing belt. Changed belt and tried to start engine and it looks like 1 pushrod bent. After replacing I now find it difficult to line up 3 pulleys. I seem to be able
to line up 2. What could be the problem?
Transit 2.5 diesel 1999
STOP you might of worped the valves is so its expensive get a machanic to check it out
brian
October 2009
remove crank pin turn crank back about 1/4 turn,turn pump and fit pin,turn cam and fit pin then turn crank and refit pin-its just a case of pistons catching on valves ,you may need to turn either or both crank and cam to allow you to fit timing pins.
k
September 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
