My Dewalt DW613 ---C type1 Router is not spining freely?
my Router has started making high pitch screams ,and is not spining freely. So I tried to strip it down to clean it ,but I cannot get the main body off to expose the motor can you help me
This Dewalt router is not easy to take apart. I think your bearings have seized up so I would recommend you replace the bearings 868768-03 and 330003-05. These bearings are very inexpensive.
Here is a breakdown of the Dewalt Router for some guidance. http://www.dewaltservicenet.com/Products/DocumentView.aspx?productid=33203&typeId=7557&documentId=21070
Good luck!
Don- www.toolsandmachinery.com
December 2009
i check my brushes and they are ok but when you turn the collett by hand it very stiff
Ian Anderson
October 2009
HI There:
It sounds like your brushes Look at the diagrams on this website
ttp://www.mtmc.co.uk/product.asp?numRecordPosition=1&P_ID=18930&strPageHistory=cat&strKeywords=&SearchFor=&PT_ID=12705988
I am retired Joiner plumber/election/builder.
(LT West Yorkshire)
trampus09
October 2009
I can answer this question...
My Dewalt DW613 ---C type1 Router is not spining freely?