How do you replace Belt for creda T622CW tumble dryer?
Belt for creda T622CW tumble dryer has snapped and was wondering how you are suppose to replace it with new belt. Can not figure out how the belt goes in between pullies and over the drum.
Phil, had the same prob myself a few months back. You will find that one of the two thermost switches on the back has gone u/s. Take the back cover off (approx. 8 screws plus the 4 holding the support bar) and you will find the two devices, these are spade connectors and pull off. You should get replacements from any washer/dryer/vacuum repair shop....mine cost me about £13 for the pair...................................and the reason I am here today....belt gone on same unit :-(
Phil
October 2006
I just did one last week. There maybe a better way but I loosened the motor assy, loosened the front of the dryer, slipped the belt between the drum and outer case then onto the motor, getting the motor as close to the drum as possible. Was a pig!
Andrew Worth
August 2006
I can answer this question...
How do you replace Belt for creda T622CW tumble dryer?