How can I get Hotpoint Ultima WF865A out of Test Mode?

thank you, you have just saved my new years eve

lenny
December 2007

Brilliant - this was the first answer that came up on my search - worked perfectly

steve
July 2007

Gah, that happend to me too. Thanks for posting the solution.

Nigel
March 2007

What a great site this has just put me back into the good books with the wife, cheers

Shaun Ward
December 2006

hotpoint aquarius in test mode, i was about to throw my machine thru the window when i took time out to search the net for a solution, i found your site and it worked, having just got back from hols with 2 kids i had a mountain of washing and am very grateful that your tip worked first time.

thanks so much.

melanie
August 2006

Worked for me too. Why wasn,t this in the manual? I suspect they are trying to make money out of us! Not good at all!

Dave
July 2006

worked great on a hotpoint aquarius also absolute lifesaver

neil
September 2005

You are life savers, worked fine on my WF865

Cheers

Gaz Eds
June 2005

Worked for me too!

Thanks.

Pete
April 2005

cheers jason this worked a treat. saven me lots of grief from the trouble and strife!

graham
January 2005

Bryan,

Not sure if you ave solved this already, but for anyone else who has this problem and cannot contact Hotpoint here's the solution.

Stop the "TEST" cycle by holding down the "START/CANCEL" Button. ("Test" should disappear off the display)
Then hold down "START/CANCEL" & "ON/OFF" at the same time for a few seconds. The message "d:Off" should appear in the display. Everything should work now.

Jason
July 2004