I have a proline logic dishwasher with no instructions and i am wondering where to put the rinse aid model dwf1250p???
jen March 2014
red slight and letter S showing. What is this?
Julie September 2013
Did the same took bottom panel off and cleaned pump,also reset the flood sensor, its now working great, took me around an hour as well..
allan August 2013
hi the on off button will not stasy on is this an easy thing to fix and how do i go about it many thanks steve
steve May 2013
When I had the lights flashing I took the bottom off the machine. Just undo 4 screws. I then cleaned the waste water pump. This is easy to spot as it's the small pump connected to the waste pipe. You need to unclip the motor then you can split the pump it's only 3 screws. I found some glass in mine.Took less than a hour to do.
Clint February 2011
mine also is 15 months old, and the lights are flshing as the pump is broken, this is a really bad brand, i will not buy again.
Dishwasher keeps needed salt?Hi
My proline logic dishwasher keep asking for the salt to be refilled after every use. It is also not drying and leaving items cloudy.
I have noticed that the last couple of times when refilling the salt that there is no water in the salt tank which there normally is.
can anyone recommend a w...Click here for how to mend it.
Proline dw5212p THREE lightd flashing??proline DWI 5212P fully integrated dishwasher is flashing an error code ie. first THREE lights on the left side of control panel flashing after programme selected no water coming into machine water pressure ok. What Does Three Lights mean anyone?...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.