I have a Sony Minidisc deck model number MDS-JB920.
The AMS knob will not scroll through tracks sequentially but when rotated will jump from track 1 to track 6, then 7 and back to 1. This also happens when I try to divide a track and it may jump several seconds or none when rotated.
I tried using Servisol Super 10 spray around the shaft. This did not improve things so I once more dismantled the deck and sprayed around where the metal and plastic parts joined and again around the shaft and this time it worked. Thanks for help.
Red
March 2009
Just spray the cleaner down the plastic shaft & around the metal area where the terminals to the board are.It might seem like none has gone in,but it usualy works!
Sorry for not explaining that bit!Hope it all works after.(you can buy a replacement encoder switch)...Gordon
gkshepherdelectronics@sky.com
March 2009
Thanks for answer. I dismantled the deck to gain access to the AMS switch but the switch is a small plastic/metal unit with no openings to spray cleaner in . How do I clean the switch please.
Red
February 2009
The AMS switch encoder is dirty.It just neds cleaning with a suitable switch cleaner spray.Unfortunatly it does involve removing the main cover & front panel to gain access to the front circuit board!If you are confident enough to remove the front board its just a case of spraying the encoder switch.Be careful as you need to prevent any static electricity from being transfered onto this board!!I have repaired numerous units with this fault,this nearly always cures it.Hope this helps...........Gordon
gkshepherdelectronics@sky.com
February 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
