Emachine w3107 wont start up after mb replacement?

my desktop starts but monitor isn't responding even tho it gets a signal but at same time it goe's zigzag in different sizes lines with the color background picture or icon thats on thescreen at that time then when I'm doing something I lose what I was doing and have to reboot and my screen is back to normal for awhile then after that while it doe's the same thing again, but after a few days of this going on, one day I went on and couldn't get anything on my monitor it was all black with and item that saids things on all 4 corners around it say things likr check your key board, check your mouse, check your monitor, check your usb port and check your pc, and so on. so with all this can you tell me what happen here to where I can't get anything on my screen like I use to??????????? and also how do I make my desktop or laptop have more speed in all area's as I do different things on either one would I have to upgrade the internet selection I like to have or something else?????

Valerie R.W. Greenlee
April 2010

check the processor is not sitting right

EL PIOJO
April 2010

Answer given by Kezza is incorrect.When changing a motherboard you cannot use the original recovery disk to reload windows. The disk required will be an original gold microsoft disk to perform option R from the recovery menu. This allows the hard drive to communicate with the new board board and restore windows without any data loss. Done loads like this, but Kezza's method will not work.See my entry on this page regarding this on this link http://www.howtomendit.com/answers.php?id=280704

chrisf
October 2009

BACK UP ALL DATA BEFORE DOING THIS !!!!!!!!!!! As it will format your hard drive.

Whenever you change the motherboard(MB) of a PC, be it any PC, Windows refuses to start as it doesn't like having the MB changed under it. It is something to do with licensing and copyright protection. The simple thing to do is find the restore disk that came with your PC. Turn on your PC, and open the CD drive, restart the PC and boot from the CD, if it doesn't do this automatically. This will re-install your copy of windows. During the installation it will ask you to insert the disk that came with your motherboard which it uses to install your MB drivers. When installation is complete you will have register Windows. All in all it should take about 20 minutes or so(Your actual mileage may vary)

Kezza
October 2009

sounds like a driver issue with your new board have you done a new install of windows or have you just put the old hdd back in, if you used reatore disks they may not contain the correct drivers for your new boards components need to get an os disk and boot from that

bob
October 2009