right explanation from adam just make sure you dont crimp insulation on the inner cores and give each cable a small pull to check they have all been gripped by screw.
gabby
December 2009
Put each lot of wires in the correct hole (brown or red in L, black or blue in N, green and yellow in E or with an 'earth' symbol) then tighten the terminal screw to hold the wires securely in place.
Screw the socket back to the backbox on the wall using the machine screws supplied, or the ones off the old socket.
Adam
November 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
