Remove the red jets from under the water tank, blow them clear. Check if water will work without the jets, if OK replace jets n job done, if no the soap pipe has grit type bits in it which have to be cleared out. First tape the trigger open, I extended the soap pipe with a piece of windscreen washer pipe for ease and sucked clear water through (be careful it tastes yukky if you get it wrong). then flushed through a full tank of hot water before refitting the jets. Always rinse the detergent from the system after use to prevent it happening again.
My Bissell pro best let is smoking and sounds and smells funny?My Bissell pro best let carpet cleaner is sounding funny and smoking and smells like something is burning. I checked the belt and they look fine what is wrong...Click here for the repair.
bissell powersteamer ? loss of suction floor and tool?every thing works except suction what to look for and how to get there?...Click here for the fix.
assembly of model 1692 bissell clearview power steamer ?I have been overhauling a model 1692 bissell clearview power steamer (for cleaning rugs, etc.), and need an assembly diagram showing all the vinyl tubing connections. I replaced the old clogged tubing, but without first making a diagram of where each connection goes....Click here for how to mend it.
Bissell Pro Heat 2X model 8910 won't pump soap?Bissell Pro Heat 2x model 8910 won't pump soap but it will pump water. The belt is fine. Any ideas?...Click here for the fix.
Where does the other belt go in the Bissell steamcleaner 1697 w?I see where the one belt goes but when I bought the belt packet it came with two different belts. Where does the other slimmer belt go and how do I get to it...Click here for the fix.
how do i connect the tubes ?i need to reconnect the tubes on my pro 2x 9200 bissell carpet steamer
and cannot remember where each one goes. is there a diagram of this product?...Click here for the repair.
my Bissell has no suction and wont dispense any water or cleaning fluid?My Bissell won't dispense any water or ceaning fluid and has no suction...Click here for the repair.
Cleaner won't stop spraying?Our bissell pro heat will not stop spraying water and solution no matter how many times you pull and release the trigger...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.