I have a Dyson DC04. The mains cable going into the switch is broken?

i had same problem and googld it and the crazy squirrel site had the answer how to do or if u cant find that jiggle two slim bladed knives either side of yellow on/off switch and pop switch off you will then see a star alankey type screw undo that and your switch housing will lift up and you can then see the switch connections and either cut back wire or test or get new switch hope this is of some help -francis.maher

francis maher
September 2009

No, you definitely do need to make the tool. I tried it with a stiff coat hanger, and got the button cap off but I broke the retaining tag off the cap in the process... With hindsight you do need an old/cheap screwdriver bent to a 90' angle to remove the button, as the tag is very sturdy...

Lee
November 2006

Thank you very much for the link! I will get to it and see if it's possible to do with out the fancy little tool! :o)

Carl Edwards
September 2006

Go to the following web page.
http://www.dyson-online.com/technical_advice/Hints_Tips/DC04_Hints_and_Tips/DC04_Cutting_Out.htm
There you will get step by step instructions with pictures. It certainly worked for me.

John Gray
May 2006