Recent: Throttle issue?

Mend Carver Camping Equipment

Mend Leisure Equipment, Camping Equipment
Find out how to mend it for free.

Ask Question
Mend Leisure Equipment, Camping Equipment
Click here to mend Carver camping equipment

Mend > Camping Equipment

Mend Leisure Equipment, Camping Equipment

carver heater cascade 2?

when switching on my carver water heater both red and green lights come on there is a single click and nothing else I have repeated this as per instructions but to no avail. It is a carver cascade 2 fitted to a 1993 compass calypso 302. Intructions say it could be a poor connection at the multi-pin connection ? where do I locate this multi-pin connection

john grant
June 2010
Hi, I've just posted a question about mine, maybe you could help? Anyway the multi pin lead runs from the inside of the control unit (wall mounted) to the underside of the water tank probably under the seating area, it is right under the round tank in a black plastic housing!
All the best!
Dunk!

Dunk
February 2011
in my handbook the reference to the combination of lights you refer to it says in wall switch or heater the way i interperate this is the connections the ones on the heater i think are behind the plastic cover where the reset button is make sure power is off hope this helps and good luck ,les

les
July 2010

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Carver Heater Cascade 2

Mend Leisure Equipment, Camping Equipment
Click here to mend Carver camping equipment

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Leisure Equipment, Camping Equipment
Click here to mend Carver camping equipment