Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
the heater in side the unit has a inlet and a exit tube you neen to clean out the holes with a small drill these tend to fill up with debre and block the water flow to all other parts getting water. there is a plate on one side that can be removed carfully and clean the chanals behine it of debre. water flow will now flow and the fluids will be dispensed.
My Bissell pro best let is smoking and sounds and smells funny?My Bissell pro best let carpet cleaner is sounding funny and smoking and smells like something is burning. I checked the belt and they look fine what is wrong...Click here for the repair.
bissell powersteamer ? loss of suction floor and tool?every thing works except suction what to look for and how to get there?...Click here for the repair.
assembly of model 1692 bissell clearview power steamer ?I have been overhauling a model 1692 bissell clearview power steamer (for cleaning rugs, etc.), and need an assembly diagram showing all the vinyl tubing connections. I replaced the old clogged tubing, but without first making a diagram of where each connection goes....Click here for how to mend it.
Bissell Pro Heat 2X model 8910 won't pump soap?Bissell Pro Heat 2x model 8910 won't pump soap but it will pump water. The belt is fine. Any ideas?...Click here for the repair.
Where does the other belt go in the Bissell steamcleaner 1697 w?I see where the one belt goes but when I bought the belt packet it came with two different belts. Where does the other slimmer belt go and how do I get to it...Click here for how to mend it.
how do i connect the tubes ?i need to reconnect the tubes on my pro 2x 9200 bissell carpet steamer
and cannot remember where each one goes. is there a diagram of this product?...Click here for the repair.
how can i fix my bissell proheat2x 9200e?This appliance has stopped spraying water or solution through the front jets although it flows freely through the tool facility...Click here for the repair.
Cleaner won't stop spraying?Our bissell pro heat will not stop spraying water and solution no matter how many times you pull and release the trigger...Click here for how to mend it.
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
2003 vE