If the hose is spraying, then the pump is working. The pump is a common problem which is why the repair shop assumes that it is the problem, but their repair cost is way out of line. The more likely cause could be the heater. The heaters on these machines have been problematic in the past. The heater is heating water and soap and quite often they will plug up and then the water will not flow. The heater is used for the floor spray but not the hose. It is also possible that the floor spray jets are plugged or that the indicator dial is fouled with something and will not allow solution to flow. I would suggest finding a shop to take it to and make sure they find the trouble before repairing and give you a estimate
My Bissell pro best let is smoking and sounds and smells funny?My Bissell pro best let carpet cleaner is sounding funny and smoking and smells like something is burning. I checked the belt and they look fine what is wrong...Click here for how to mend it.
bissell powersteamer ? loss of suction floor and tool?every thing works except suction what to look for and how to get there?...Click here for the repair.
assembly of model 1692 bissell clearview power steamer ?I have been overhauling a model 1692 bissell clearview power steamer (for cleaning rugs, etc.), and need an assembly diagram showing all the vinyl tubing connections. I replaced the old clogged tubing, but without first making a diagram of where each connection goes....Click here for the fix.
Where does the other belt go in the Bissell steamcleaner 1697 w?I see where the one belt goes but when I bought the belt packet it came with two different belts. Where does the other slimmer belt go and how do I get to it...Click here for the fix.
how do i connect the tubes ?i need to reconnect the tubes on my pro 2x 9200 bissell carpet steamer
and cannot remember where each one goes. is there a diagram of this product?...Click here for the repair.
my Bissell has no suction and wont dispense any water or cleaning fluid?My Bissell won't dispense any water or ceaning fluid and has no suction...Click here for the fix.
how can i fix my bissell proheat2x 9200e?This appliance has stopped spraying water or solution through the front jets although it flows freely through the tool facility...Click here for the repair.
Cleaner won't stop spraying?Our bissell pro heat will not stop spraying water and solution no matter how many times you pull and release the trigger...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.