the light on switch for immersion heater comes on its economy 7 but the water is not heating while on cant even hear it working ,is it the element inside not working or is there a reset button i keep reading about needs setting ,if there is what do i do.
no reset button,its either the thermostat,or the element,you need to test both with a test meter,
you should get around 19-20 ohms through the heater,you need to remove a wire from the thermostat that feeds the element,before you test or you will get wrong readings,turn power off first.
mm,
February 2011
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
