i am trying to start my ford transit just refited motor the two conectors coming from fuel fillter are the only ones i have desterbed how ever have check that thay are ok . i have been undoing the 10mm on the injector and cranking the motor .it starts and dies hope some one can help
Starts and dies sounds as if the crank angle sensor isn't working.
That is exactly what will happen if it is faulty or not connected
make sure you've refitted the wire to it also make sure you haven't fitted the speed sensor connector to it'"
it can be done".
Hope this helps
Regards Mark
Mark
October 2011
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
