Recent: Throttle issue?

Mend Citroen 25 Cars

Mend Vehicles, Cars
Find out how to mend it for free.

Ask Question
Mend Vehicles, Cars
Mend repair fix Citroen 25 cars

Mend > Cars

Mend Vehicles, Cars

t-reg citroen saxo keeps cutting out?

saxo cuts out between 15-25 ish mph when slowing or changing down a gear...

citroen had it on a diagnostics machine an said nothing was wrong...if it doesn't play up while it's on machine it wont show a problem will it?
where can i find a proper mechanic who knows why something is wrong by a owners description?

could it be....fuel starvation
air problem?
in line fuel filter?
dirty injectors?

markko martinez
October 2006
change the leads from your spark plugs into the engine block, about twenty qid from halfords. well, that fixed mine.

mike
May 2010
hi there my 2001 saxo vtr is doing the same its driving me mad it will be ok then al of a suddern it will cut out am getting sick of it now what do i have to change to get it right some one please help me thanks

liam
February 2010
mine does a simular thing... revs up and down to 2000 revs on tick over and wants to cut out when reving..... i have been told it's my throttle position sensor.

blake
September 2009
Any one solved this problemo?
I have a 2002 Saxo Furio that keeps trying to cut out, usually when at low revs and I go to accelerate its driving me mad

Ami
August 2009
well i have had the same problem i have changed the lambda sensor and also the temp coolant sensor and had to have the ecu reset sound now

billy
June 2009
i had similar problem revs up and down irratic revs the car was put on diagnostic 3 times no result finally inlet manifold sensor fitted this sorted no problems for 5 years so far

niko
April 2009
Guys I had the same problem on my 1.4 1996. I solved it by depressing the inertia switch which is a rubber button found in the top right side of the engine bay. This is a small switch that cuts the fuel in the event of an accident. It works with a small ball bearing which is held up by a magnet. When you hit something it dsiplaces the ball bearing which falls and blocks the fuel. The only problem is if the magnet wears out the ball bearing keeps falling down all the time. I would start by just depressing the button but if it continues you will have to replace the inertia switch. Hope this helps.

Paobrien
March 2009
i have a 1.4i saxo and have the same problem [p reg] it goes alright then cuts out at lights stutters when going along changed the plugs -coil -leads still the same .
as soon as i move off it stutters or cuts out .but restarts on the key.
where is the inlet manifold sensor ?? is there a relay controlling the sensor ?one of the relays under the glove box does click a lot from time to time . HELP!

dave martin
January 2008
Hi,

My saxo vtr is suffering similar problems, cutting out at lights, traffic, cold -revs drop then shoot up.

From what I can gather it's something to do with the air inlet manifold sensor.It's telling the throttle control that there's enough oxygen going to the engine but its not.

I've got my own question up regarding this issue and waiting for confirmation before I set about my car with a blow torch.

If you do get any info I'll be grateful if you could forward it on to me. But what ever you do dont let any garage change your ecu/ temp sensor / idle control , as its not the ecu that has the fault, and it costs an arm and a leg.

amo
January 2007
Mend Vehicles, Cars
Mend repair fix Citroen 25 cars

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vehicles, Cars
Mend repair fix Citroen 25 cars