I have an old type CH/HW system with storage cylinder in airing cupboard and Bermuda 552 back boiler. I noticed that hot water from boiler going to pump (Grundfos UPS 15-60) also fills up expansion tank in the loft (there is a junction before the pump) causing the tank to overflow.
I tried playing with different settings on the pump but no joy. Anybody has any ideas what this might be? To me it looks like the flow of water from the boiler is too much for what the pump can manage thus some of the water goes into the expansion tank.
The pump circulates the water, If the expansion tank is overflowing, water getting into system somewhere, As the expansion tank is highest point, water finds its own level, the system holds so much, it just goes round the pipes, get an odd bit of water into tank sometimes, on expansion, But after the expansion, no more in the system to go to it. Unless as I said water getting in somewhere.
SD
January 2012
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
