Dualit 2/4 slice toaster (Model # A4/84) - Don't know whee the wires go!?

I have a unique problem in that I took the 4 slice toaster apart and didn't think to jot down which wires go where. I have googled "dualit wiring diagram", "dualit assembly", and anything else I could think of. I can't find anything that shows where to plug the wires back in. Ironically, I was just cleaning it, not replacing the elements. The only wires connected are the 2 black power cord wires into plugs 1 and 4 on the timer. The power cord green wire is attached to the common ground (toaster housing). I also have a brown wire that is connected between pin 5 of the timer and pin 1 of the 2/4 slice selector switch. The connector on pin 5 of the timer (brown wire) contains an addition male connector modification as well.

I am left with 2 red wires that come from the elements which I think go to the 2/4 slice selector switch pins 2 and 3. I also have a blue wire coming from the elements that is Y cable. I think this plugs into pins 2 and 5 of the timer. Can anyone be so kind as to verify or correct this?

Thank You
Mike