pull the back panel away and the inner drum becomes loose.feed the belt down the back between the drum and the back panel.slide it over the drum to the same position as the old belt.refit back panel and drum in to correct position.lay tumble dryer on its side.remove cover plate (4 screws) on base.find belt and pull like hell until it is over the motor pulley.now rotate drum until belt is aligned with motor pulley.
Loud noise as though something rattling about ?When white knight gas tumble dryer is on it sounds like something is rattling about the drum...Click here for the fix.
Dryer not coming on?I have a small white knight tumble dryer that has a manual timer when the timer is set this is working but the drum isn’t turning and no heat is being produced. How can I fix this....Click here for the fix.
white knight 3 kg door problem?the dryer works fine if i hold the door closed myself but the door will not stay closed :(...Click here for the repair.
How can I fix white knight cw43aw tumble dryer ?It turns on and is heating up but drum won't go around when door is shut but does turn if I move it when open. Have checked belt and all ok. Also if I turn it and then shut door and turn it on it will go...Click here for the repair.
the bearing that holds the drum up has snapped ?my white knight tumble dryer drum has dropped because the bearings that hold it ip and onto the back of it has snapped how can i fix this please can i just used a bolt and nut till i can afford to get another one...Click here for how to mend it.
Cleaning Condenser?We have a White Knight Tumble Dryer 77AW. Model 0312 76A.
Instruction book says to clean condenser monthly.
How can I locate the condenser to clean it?
Instruction book does not help!...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.