details please for block connector colour wire goes to switches on Pro 4.0?

I have a Goblin Pro 4.0 which is a deep red colour plastic body if that helps, my problem is that my son used it the other day and somehow managed to pull the block connectors of the rear of the yellow on off switch and on off yellow steam switch to the left of the machine front and also the green steam ready light and red low water light connectors to the right side of the front of the machine and I have searched the web for details on which colour wire block connector goes to which switch but there isn't any details so I'm really struggling to sort this problem, could anyone who either has the same machine please either gently lift out the switch connector to the left and the lights connector to the right these just lift out easily with a flat ended thin screw driver and look at which connector goes where as in from the yellow on off switch to the far left first from top of the switch to the bottom and then in sequence same with the yellow on off steamer switch then top to bottom green steam ready light and finally top to bottom red low water light please, there are connectors with single wire into them and ones with double wires into connectors too, I would really appreciate help solving this issue please as at the moment I can't use the steamer as I don't want to risk guessing what sequence the wire block connectors fit and then damage the steamer, Thank you in anticipation of someone being able to help me with this issue, Kind Regards, Mike