I have a De Dietrich extractor fan. Model # is DHD365XP11
The motor will not start by itself but if I give the fan blades a push it does. I have checked the start capacitor (visually) and there are no black / burn out marks. Could it be something like a centrifugal swicth and if so is this located on the motor or in the circuit board / control box ?
Trying to work out if I need to order new motor, control box or cursor
thanks
Thanks Gladys the motor is clean but I tried the WD40 anyway but no joy
Noel Conlon
February 2015
If it's a bit stiff when you turn the fan, the motor could be gummed up. If you can get to it and see if it needs a clean, that may help. If you can get to the bearings you could try a little WD40 but its likely that you'll need a new fan as the oilite bearings have probably had it
Gladys
February 2015
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
