Frister Rossmann euro lock 4df mkII looper?Hi I’m looking for a frister Rossmann euro lock 4df mkII, under looper holder, do you have anything that may fit or know anyone that may have.
Thanks in advance. Lee...Click here for the answer
need the following parts for a super novum x serial number 692000843?Feet for the bottom of the machine case., Foam strip between the machine and the case.. and an instruction book....Click here for the answer
FS service?I have the FS service manual it tells me to remove two screws so I can remove the arm cover plate to oil points indicated in top of the machine head it but it does not say were abouts the two screws are the only marks are for the oil points.
Is it possible for help with this problem I will be grea...Click here for the answer
How to get needle clamp back in place?Needle clamp fell part way down needle bar need to know how to get to the clamp back in place....Click here for the answer
How can I get the right tension on my Frister Rossmann Cub 3?I have a Frister Rossmann cub 3 sewing machine that hasn't been used for a while. I set it up to test and after realising that there is hardly any tension in the stitching from the needle and the bobbin I checked the needle to see if it was picking up the thread from the bobbin. It does but then sti...Click here for the answer
how to get the tension right on my machine?my singer sewing machine 457 gives long stitches at the underneath of the material . what do I do to get it right again...Click here for the answer
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.