 |
Fixed for free! |
 |
|
|
Popular |
|
|
|
Help someone |
|
|
|
Fault info. |
|
|
|
First time? |
|
|
|
Answers |
|
|
|
Search for a fix |
|
|
|
Mend it |
|
|
|
|
|
 |
| Derestricton ?I have a direct bike DB50QT-111 that does up to 30mph. Do you know how to de restrict it? I looked under the battery but there’s nothing there....Click here for the repair. | | Ford Galaxy immobilzer reset?I took the battery off for 3 months now the immobilizer wont let me start the car. How can I reset the immobilizer please? Key operates doors and ignition comes on. If I put power direct to start it cranks over but no sign of starting....Click here for the repair. | | Sachs 301 TK carb?Is there an instruction manual for these carbs, preferably in English?
Thanks,
Tony Marshall, BATH UK...Click here for the repair. | | carb problem?bike runs fine apart from when shutting throttle when going along, the revs only drop to around 3000 . could this be a diaphragm problem...Click here for how to mend it. | | Replacing Starter Motor?HI there I have an Aprillia Habana 125 custom 2003. I have removed the starter motor and bought a new one but I have forgotten which order the wiring goes back and I cannot find any diagrams online
Could you assist please...Click here for how to mend it. | | X9 Piaggio 250 Evo Indicators.?Does the above scooter have two indicator relays, one for left and right?
My left indicator is working fine but the right indicator doesn't, which leads me to believe there may be two relays if I can find them....Click here for the fix. | | how can i fix my 600 bandit?my bike wasn't running right, so had the tank cleaned, new fuel, new fuel filter, carbs cleaned and reset, and new plugs fitted. it now revs perfectly in neutral, but as soon as I try to ride it it splutters and cuts out, especially at low revs, even when the bike is on the centre stand and first ge...Click here for how to mend it. | | XS650 head gasket??1979 Yam xs650 cylinder head has a small groove in the metal about 4mm wide and 2-3mm deep around the outside of the gasket mating surface but stops short either side of the cam chain adjuster housing, does anyone know if sealant goes in it before the head gasket?? Cheers....Click here for how to mend it. |
|
 |
 |
 |
 |
|
|
|
Fix
what? |
|
|
|
Help
wanted! |
|
|
|
Advertisements |
|
|
|
Fixed! |
|
|
Just saved myself £99. Many thanks for the solution. Took 2 minutes.MichaelMay 2020 | |
|
|
|
|
|
|
|
Mend it |
|
|
|
All appliances! |
|
|
|
Mend it |
|
|
|
Fault find |
|
|
|
Advertisements |
|
|
|
|
Important |
|
|
2003 vE