replace felt seal?How do I replace the felt door seal for a Hoover condenser dryer model No: VHC391 Vision HD...Click here for the repair.
How can I fix my Simpson maxidry452 door switch?I am trying to replace the electrical wires from my dryer to the door switch, I am unsure about which way to plug them in.can anyone help please...Click here for how to mend it.
Opening back of BEKO tumble dryer?What type of screwdriver do I need to open the back of my BEKO DCX711005 tumble dryer...Click here for how to mend it.
No power to my AEG lavatherm 37320?We have no power to our Lavatherm 37320. The fuse in the plug is good. Is there a fuse inside the machine?...Click here for the fix.
Error F04 then F06 on Hotpoint TDWSF83BEP?For the above dryer, a suggestion to look at heater assembly.
Found thermal link blown. Replaced with another 180c part.
Still F04 fault display, checked all pump and filter sensors and fault now changed to F06 which points to door lock but there is no door lock. Only thing on door is a micro ...Click here for how to mend it.
Zanussi tumble dryer TD 520?We have got replacement catch for this old tumble dryer. The front fitting on the main body has two screws but these don’t seem to release the catch. Do I need to take top off the dryer to get down inside?...Click here for how to mend it.
Beko DRCS68W No lights on panel but light on inside?I thought the fuse was gone as it was inoperable. Nothing happens when I switch it on. No front panel lights at all. However, when I open the door the internal light is on, so power is getting through somewhere. I’ve tried the reset routine and clicked the condenser red lever several times with no...Click here for how to mend it.
Can’t get condenser back in?Hi,I have a proline TDC6A tumble dryer, took the condenser unit out to clean it and now it won’t go back in fully to be able to close the door. Cannot feel it catching on anything. Did the same things a few months ago and after several days it just went back in ok, but this time no joy. Any ideas ...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.