My Minivator 1000 was just reinstalled in my new condo. After fixing a few problems that were quite obvious and replacing the batteries, power up shows the - in the diag window but it doesn't move. looking at the pcb I see the LED is flashing red. It mentions the OSB in the Fault Analysis chart as being a possible culprit. It also say "reset the OSB' but doesn't say how. Where or hoe do I reset it.
My Minivator 1000 is stuck ?My Minivator 1000 has gone unused since my father passed away. We have had it for three years. The lift got jammed and is now stuck halfway up the staircase. there is no power going to the chair . I have checked the circuit breaker and made sure that the the receptacle is working. I cannot locate ...Click here for the fix.
Minivator 1000 Stair Lift Dead?Trying to help my neighbour out here.
The 1000 was installed around 4 years ago for his wife. She sadly passed away at the beginning of December & the lift has remained used (& unfortunately powered off) until now. It's now dead.
I have accessed the batteries & both are flat but there is also ...Click here for how to mend it.
Minivator 1000 stair lift stuck at the top of the stairs? help?stair lift worked on the way up the stairs ,but wont come back down ?
any ideas ?...Click here for how to mend it.
Minivator 1000 stairlift?The led next to the switch is flashing, does this mean it's charging or what ?...Click here for the repair.
ERROR 2 ON Minivatotr 1000 Stairlift?Does anyone know what the No 2 error code is on the minivator 1000. Not sure what led to my parents chair breaking, but having just replaced the batteries it now shows a blinking 2 ?
Thanks...Click here for how to mend it.
code numbers?could you supply me with a list of meanings for the various code numbers shown on the display next to the on/off switch.My stairlift is a minivator 1000.manufactured in 2008 I think.Many Thanks Bob...Click here for the repair.
minivator 1000 stairlift?Hi i have just bought a second hand minivator 1000 everything works great until i try to get the thing tio come down ive looked under the footplate and the switches seem fine , does anyone have any ideas on how i can fix this so my daughter can get down as well as up the stairs plz Joanne x...Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.