Sunbeam VT60 Vista Radiant Control Automatic Toaster?
Is there a fine tuning adjustment for the shade control on this model. The bread is not being toasted uniformly under the same knob setting. I know some models have an adjusting screw under the knob itself; but, this model has a push button at the knobs center to lower the bread. Does not appear that knob pulls off.
There is a screw behind the crumb door at the units base. Not sure if this is the shade control adjustment or the spring tension for the raising and lowering of the bread. Any thoughts to fix shade adjustment.
Radiant control 1988 sunbeam toaster?My 1988 toaster works fine BUT the radiant control slide is at the absolute minimum and is still sometimes too dark. I know there is a secondary adjustment but under the handle at the end all I can see is a hex head bolt with what looks like an Allen key centre.... Is this the secondary adjustment?...Click here for how to mend it.
sunbeam radiant toasters?I have 2 that need repair. One is mine the other my deceased parents'. One doesn't turn off at all ( I must pull the plug to stop the toasting and the second releases the toast prematurely and I have to put the bread in 3 times to get toast. Any suggestions?...Click here for the repair.
sunbeam toaster?When I plug my radiant T-35 in, it automatically comes on without putting anything in it. I have to unplug it to have the toast pop back up, is there anything I can adjust or do to solve this, or just throw away the toaster....Click here for how to mend it.
Why radient toaster continues operation?My Sunbeam Radiant Control toaster VT 40-1 will toast , cuts off and toast rises but immediately the toast descends to toast again. It again rises to go down again - and again. I have adjusted the screw under the crumb tray to no avail. Are my corrections not right? Is an adjustment necessary on...Click here for the fix.
sunbeam toaster old chrome radiant control model T 20 B?Will not remain switched off. Continually turns itself on briefly and off again. When toast is inserted works just fine....Click here for how to mend it.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.