router bit?made finger jointer for table router and everything squared up so tried some test cuts 3/8(8mm) on 3/8" ply set bit height 3/8 did test cut. cut first and second gap. the third on clearing pullback chipped layer ply off finger next to cutter. Then last cut it chipped whole finger off.
purchased t...Click here for the fix.
Belle 150 mixer spins the wrong way.?Every now and again my mixer turns on in reverse and loosens the drum, I have to turn it off and on again to correct it. Does anybody know what wou d cause this it's a belle 150 240v minimix...Click here for how to mend it.
Bosch al3640 charger not charging.?Hi all, I have a 36v drill and use the al3640 charger to charge. As soon as the charger is plugged in and power turned on the green and red light alternate flashing and clicking (assuming relay) as the lights alternate, it doesn't stop and plugging a battery in does not change the flashing, so looki...Click here for the fix.
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.