Other users of howtomendit.com provide the answers. The more detail and information you provide in your question the easier it is for others to help you.
Smog DF614WE dishwasher after electric cut went off. Read about reset and worked to get 2 solid lights at right side but then when pressed program moved to single light on left Rinse program and will not do anything. Checked drain, sump, and pump impeller and all ok just not responding. Any suggestions please?
Mike November 2020
Turn off power switch and pull plug from socket. Leave power off for a few minutes then plug back in and see if it has cleared, If not then main control board has probably been damaged in the power cut you had and may need to be replaced.
How do I check if the control board is faulty , it intermittently powers up?I repaired domestic appliances many years ago and my cousins dishwasher is faulty, there’s power to the on/ off switch on the machine but the light are only coming on intermittently...Click here for the fix.
Following prev question smeg DF614WE powercut?Followed your advice snd unplugged and then retried- cleared light fault and therefore set it away. Filled fine and pump ok pumped water out etc through 16 minutes of programme then bleeped4 times snd stopped. Lights showing constant last light at end (pan light) and 2nd and 3rd flashing (glasses ...Click here for how to mend it.
The thon/off button on my Kenwood is not working properly. When I press it ?The three small lights on my Kenwood dishwasher are supposed to stay in when I press the on!/off switch only one stays on. What is happening....Click here for the repair.
why are the wash and rinse lights flashing on my Hotpoint Aquarius FDW20 di?why are the wash and rinse flashing at the same time on myAquarius dishwasher I have turned it off at mains to reset. I worked once and the went back to the flashing mode. that is the question...Click here for the fix.
Dishwasher heating problem?belling intergrated dishwasher IDW450 Mk2 not heating the water. I have removed 1800w flow through heater and have continuity across terminals. Seeking further guidance....Click here for the repair.
Probe message on Kitchen Aid oven?How can I turn the set probe temperature message off on my Kitchen Aid oven?...Click here for how to mend it.
how do i fix my belling idw 450 dish washer?the dish washer tried to empty but due to a kinck in empty pipe finished blowing house fuse pipe has been straitened and fuse reset left hand power light comes on threelights on left hand side come on for few seconds then go off there is no screen on this model for codes and nothing else works...Click here for the repair.
Attempting
repairs can be dangerous.
In many instances work should only be undertaken by a qualified
professional. Ensure you have read our Small
Print page before using information supplied via this website.
2003 vE