my aquatronic 2 shower power light is on but it wont heat the water?
my aquatronic 2 shower power light is on but it wont heat the water, it first started to get hot then cold them back hot again now it wont warm up at all.
check the heating elements
see if power is getting to them
if so do a continuity test to see if they are not broken inside
do a ohms test they should be 12 - 18 ohms
if all ok then it's poss a micro switch.
hi-spec plumbing
August 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
