I have just refitted my kitchen and the boiler has started to play up. I first thought it was dust that has been building up but even after a good clean doesn't seem to help.
The following happens:
- There is constant power to the boiler
- The power light suddenly goes off and there is some 'sparking noise' from behind the PCB
- If I then losen the screw and wiggle it a bit, it kicks into life again.
My thoughts are bad soldering on the PCB. Any expert out there who can help?
I had the same problem with mine a year or so ago. It's apparently a problem with this boiler. I removed the PCB (after totally isolating the mains power !) and saw the offending joint (it was charred black) I re-soldered it and that was it; good as new. I hope that helps
Morphim
November 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
