puling to one side may be ball joints ???

you probably have got a ball joint gone possible the bottom, if so there is two ways of fixing it u can remove the wishbone and replace the hole item, or u can drill out the rivetes from the wishbone and just fit the joint using new bolts. if its the trackrod end, u will have to remove it from the hub and lossen the locking nut on the rack,and undo rod to remove.oh and the pulling to 1 side may be brakes, normally joints dont cause the pulling unless the car has been tracked with warn joints

jack monkeywrench
April 2005

you probably have got a ball joint gone possible the bottom, if so there is two ways of fixing it u can remove the wishbone and replace the hole item, or u can drill out the rivetes from the wishbone and just fit the joint using new bolts. if its the trackrod end, u will have to remove it from the hub and lossen the locking nut on the rack,and undo rod to remove.

jack monkeywrench
April 2005