What glue?

If I were you I wouldn't do anything myself. I would take it to the nearest music store they will be able to fix your problem. DO NOT TRY TO FIX THIS PROBLEM YOURSELF!!!! (PLEASE!!!!!!!!) you know sometimes oops is forever.

Mickey-G TN
July 2008

Use polyvinyl acetate. Layman's terms= White glue. Elmer's is a very low quality version of this glue, but is easy as all hell to get. It dries hard and brittle, good for tone transfer, and is water soluble. And it will bind with almost anything that yamaha would have used for a nut. Clean both the slot and the nut of any glue or wood with 180 grit sandpaper (do this carefully as to not misshape either), apply a conservative amount of glue in the slot and onto the bottom of the nut with your finger, press the nut in and give it a little wiggle back and forth and you will feel it tack up. Do NOT tune your guitar up to pitch for at LEAST one hour. Make sure you clean up the excess with a damp paper towel and a little trick to get downward pressure is to rest the middle two strings in their slots and gently and evenly tighten the strings.

Thank you for not using superglue.

Fredericks Fix and Finish
May 2008

super glue IS the best option.bonds disimilar materials but has poor shock resistance.so is removable with a sharp lateral hit(towards the mchn heads),worst thing that could happen is some of the nut fracturing and remaning stuck but i can se no reason that u would want to take the nut of than to replace with a new one this should not matter

caine
May 2008