How can i fix my Zanussi FX 1465W washing machine?

No not checked filter,the washing works great it's just the knob sticks so I have to turn it manually.

Lisa woodhead
September 2012

The knob sticks so I have to keep turning it round manually,the washer goes through its cycle ok but it's just the knob wont turn only if I keep moving it on one my self.

Lisa woodhead
September 2012

It's the dial it stops near end of cycle to I have to turn it manually

Lisa woodhead
September 2012

suspect the prob maybe the result of the washing landing awarkly b4 the spin cycle,zanussi have a balance sensor which can 1.reduce spin speed 2.abort the spin altogether if the machine senses an out of balance load,normally associated with heavy items ie towels, dressing gowns or small loads like say that woolly jumper you can only handwash in the sink and then spin on its own.suggest you actually put more in it!you can prove this by putting the machine on empty and spinning it because it will be perfectly balanced and therefore should spin,if then and only then it will not spin it will be a motor/pcb fault. expensive on zannusi.

andrew
July 2008

have you taken the filter out and cleaned it lately

ck
July 2008