Mend > Lawn Mowers

rover 5hp lawn mower idle wont adjust?

i have a rover 5hp lawn mower and i cant control the revs. i was told that there is an internal governor as well as an external. is that correct? if so where are they situated?

brian
July 2008

Rover Garden Tools, Lawn Mowers Lawn Mower Told

I believe your answer was wrong. When the engine is off, the throttle should be wide open. When the engine is started, the governor will slow the engine toward idle speed. Spring tension pulls the throttle open and the governor pulls against the spring tension.
Be sure the throttle has a spring connected to it and that the governor has a linkage connected.

ger
September 2008

Depends on the engine really - some B&S motors have an internal governor, obvious because of a spring loaded lever that sticks out of the crankcase. Others have an air governor, which can be seen if the cooling cowl is removed from the engine. Governor problems are fairly rare (especially the internal types). Chances are there is a spring that has come off. With the engine off, the governor should hold the throttle open. With the engine running, the throttle should close against the throttle stop screw on tickover.

John
July 2008