Recent: Potterton ledger super gas fire?

Mend JCB 525-58 Tractors

Mend Vehicles, Tractors
Find out how to mend it for free.
Ask Question
Mend Vehicles, Tractors
Mend repair fix JCB 525-58 tractors

Mend tractors ...

Mend Vehicles, Tractors
3

Fordson starter solenoid?

Fordson Power major, starter solenoid. Bought new solenoid but did not take notice of connections. Two large b... [Read more]
Mend Vehicles, Tractors

Problem with JCB 3CX transmission?

I have a 2015 JCB 3CX. torque lock works while travelling on road but fails to unlock on slow down, resulting ... [Read more]
Mend Vehicles, Tractors

Power major 56 to 60s?

Fordson major old model new battery, push down lever works fuel good just not starting
Mend transmission jcb gear

Transmission not working?

have a 1989 JCB 3CX. Was in 2nd gear going forwards in very soft soil so was hard going. Transmission just sto... [Read more]
Mend Vehicles, Tractors
1

Jcb 525sforward and reverse gear when started blows fuse?

jcb telehandler525s replaced forward and reverse gear when activated the main fuse blows, 10 amp fuse used a... [Read more]
Mend Tractors

Mend > Tractors

Mend JCB 525-58 Steering Going Better

JCB 525-58 telehandler?

Does anyone know why the steering keeps going really stiff , it's as if it has lost all power assistance then it seems to get better . I wonder if there's a priority valve but i can't find one! Or maybe i should be suspecting the danfoss steering valve. The hydraulic pump seems fine as it lifts well even at tickover

Antony Brew
September 2008
JCBJCB 525-58Vehicles, TractorsSteering Going Better
Hi i opened up the hydraulic tank and found there are 3 pick up pipes obviously supplying oil to 3 pumps anyway they are fitted with strainers and these had disintegrated and bits of them became lodged in one of the pipes - having cleaned it all out ( and fitted new strainers ) it all seems to be working fine- thank you all for your help.

abbeybodger
September 2008
Hi, I have just been looking at the schematics for the steering circuit on your machine. There is not a a steer priority valve fitted to the system.
As for your fault sounds to me like your steering orbital valve is the problem. There are multiple supersessions on this part.
Hope this helps

Chris C
September 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Steering Going Better
Mend Vehicles, Tractors
Mend repair fix JCB 525-58 tractors
Mend Vehicles, Tractors

jcb 526 1994?
Mend Vehicles, Tractors

removal of jacking legs and ram on jcb 3cx 1986?
Mend low pressure light

1987 JCB Syncro Shuttle trans Low Oil Pressure Light Stays On?
Mend Vehicles, Tractors

2013 jcb js130 ?
Mend Vehicles, Tractors

JCB 3CX won't rev?
Mend model looses power

my jcb 3CX 2003 model looses power and fails to push especial when the engi?
Mend 1990 3cx engine

JCB 1990 3CX not moving forward/backward?
Mend jcb 3cx transmission

Jcb 3cx transmission?
Mend Vehicles, Tractors

Jcb 525sforward and reverse gear when started blows fuse?
Mend Vehicles, Tractors

Jcb ram seals?
Mend power loses minutes

How can I fix a loss of power on my JCB JS 200 excavator?
Mend problem power stopping

Jcb transmission problem?

Other models...

JCB 1400BJCB 1cxJCB 214S IIJCB 3170plusJCB 360JCB 3CX 86JCB 3cx powershiftJCB 3CX TurboJCB 3D Mk2JCB 3D111JCB 803JCB JS 200

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.

Related Categories

Mend Caravans/Motorhomes
Caravans/Motorhomes
Mend Cars
Cars
Mend Lorries/Trucks
Lorries/Trucks
Mend Mobile Homes
Mobile Homes
Mend Motorcycles
Motorcycles
Mend Trailers
Trailers
Mend Vans
Vans

Mend Vehicles, Tractors
Mend repair fix JCB 525-58 tractors

Related searches...

jcb gear boxrepair replace parts