how hard is it to change safety valve on the 23 kw as i`m losing pressure on ch and water is dripping out of over flow pipe outside. how much to fix by proper person or if myself how much valve and where to get -live Ashford Kent. many thanks
Ray
Drain down heating circut of boiler.
Remove expansion vessel hose from hydrolic block.
Remove draining pipe from safety valve and unscrew safety valve.
Fit replcement safety valve in reverse order to removal.
Important: Seal the safety valve thread with joining compound
mike
February 2009
Many thanks , Andy
Ray
February 2009
It's a nightmare to change that, i had to get a proper heating engineer in to do mine in the flat i used to have which had the same boiler. It's Plumb Centers own brand of Boiler which is sourced through Hepworth Heating but is now discontinued.
If you're not Corgi registered which i presume you aren't i'd suggest you get someone in. Parts should still be available through your local Parts Center branch and if not in stock they should be able to get for you. As i said, it aint an easy job.
Andy
February 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
