Replacing the belt on a Fisher and Paykel ED56 Clothes Dryer?

Can you send me instructions to replace a belt on fisher and Pykel dryer model ed56 to me

Janet Jones
June 2015

Once back panel is removed you will see that the drum is held in place each side by a bracket with 2 screws fastening the bracket to the cabinet body. Remove the 2 screws & this will give you room to put the belt over & around the drum. You will also have to disconnect the wires from the element & thermostat so you can get the belt past the wiring. Make a note or drawing before removing the wires to make sure you get the right colours back in the same place they come off.

Lincoln Appliance NZ
May 2009