Mend Crate G40C-XL Guitars

Find out how to mend it for free.

Find out how to mend Crate G40C-XL guitars

Mend Guitars

Mend Guitars

Mend > Guitars

How do i get my crate g40c-xl to stop cutting out?

my crate is cutting out, and my channel A, B keep switching in and out between each other. i pulled the two gray cords from the gold box and haven't had a problem since, i just wish i knew what i did to it.

guy from wisconsin
June 2009

Crate Crate G40C-XL Musical Instruments, Guitars

This one I came across hums real bad I havnt opened yet

Situations you.all ate having is interesting

krinderhagen
November 2013

You basically disconnected the reverb unit. My amp is the same way.... no more reverb for me.

DM
June 2011

you need to take the head apart and resolder the 4 jack-points back on the board takes 15 minutes, mostly taking all the knobs off.. thats it...

eric
November 2009

throw a fan behind it!

the G40C XL has a design flaw that causes two 50 ohm resistors to get too hot and that's why the amp goes silent intermittently. also, any amp tech will be able to replace the resistors, which should solve the problem.

marty d
November 2009

Had same problem w/my crate and I bought a foot pedal 'cause every repair in town told me minimum 6mo wait. Pedal works just fine.

David Wagenecht
September 2009

Depending on the age of the guitar, if condensation built up then rusted on an effects loop (if the amp has one) or perhaps on one of the connections, it might cause it to cut out. I had a Marshall that did this to me. Good luck.

wormtownhero
August 2009

The same thing happened to me. Mine just somehow fixed its self.... I think it is a flaw in the Amp. Maybe an electrical short?

Hope this kinda helped.

It
July 2009