Fuel Line Replacement?

I figured it out myself. The wire didn't work. Slit the line in half part way and discard only half and leave the rest of the hose intack. Now you are working with a hose half as thick, not the whole hose. It will fit into the hole at the bottom of the tank. Push enough thur to grab it from the inside of gas tank with a needle nose pliers. Now pull the hose. With your finger nail you can get the hose through the hole on the bottom. Pull the slit part out of the tank and cut it off. Remember you have to buy enough so after you pull the hose out of the tank and put the filter on you end up with enough to attach it to the carburetor. I bought 12 inch piece. 6 inch discard and 6 inch piece I needed to make the connection.

misterbee
July 2009