I had an E10 error code trying to use dryer and replaced the 3 way solenoid valve with new one. Dryer still not working after new valve fitted. Any other ideas?
there is a hose that goes from the inlet valve (bit you changed) to the valve on the underside at the very back of the soap dispencer draw.remove this hose from the new valve you fitted and blow down it hard as it might be blocked.also there is a condensor tank down the right hand side as you look from the front.this could be blocked
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.