dw681eswmh on start,drains ,fills, then drains again 7flashes on light above start button. have had problems with flow sensor before but that was fixed
tosh
December 2010
Fault code 9 means that the machine controller is receiving a message that water is still flowing in to the machine after the full level has been reached & the inlet valve is switched off. Can be caused by a faulty inlet valve not shutting completely off but can also be caused by a fault on the control board which you would not be able to repair. Try cancelling the error by pressing & holding the start button for several seconds. That will remove it from memory. If it comes back then 1st thing to do would be replace the inlet valve & erase the memory again. Then hope that it does not return because next step is replacing the control board.
Lincoln Appliance NZ
November 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
