reset part 2 VERITAS R8?

Rick sounds like panel has reset to factory values. Do you have the Installation manual? You need to go into engineering mode (code 1234 and prog - all lights should light) enter 51 for part 1 or 52 for part 2 and select the zones that you need for that suite i.e if the zone no is lit it will arm so you want 1, 2, 5,6,7 lit. Press pog and panel should chime to confirm.Press reset when finished to return to normal.The factory option changes zone 1 entry exit to change to full guard on part set. Hope this helps

Tony T
February 2010