How to replace solenoid valve?

Look at the Shower Doctor site. He gives specific guidance on how to replace solenoid. There is also a video.

Parry
April 2020

You can see the valve here:
http://www.applied-energy.com/images/parts/redring/photos/955.jpg

http://www.applied-energy.com/spareparts/brand/diagram.php?id=217&searchbrand=redring

I want to remove the blue solenoid coil. Still can't figure it out how.

Someone selling it on ebay says:

"YOUR OLD COIL JUST LIFTS OFF, THEN SIMPLY JUST SLIDE THE NEW ONE ON.

YOU CAN LEAVE THE WATER ON!

FITTED IN 5 MINUTES

THIS WILL FIT EVERY REDRING SHOWER MADE FOR THE LAST 30 YEARS OLD INCLUDING... "

Sounds easy, but it is not really.

http://cgi.ebay.co.uk/REDRING-ELECTRIC-SHOWER-NO-WATER%3F%3F-SOLENOID-COIL_W0QQitemZ180471951549QQcmdZViewItemQQimsxq20100223?IMSfp=TL100223133001r39962

dragonf
March 2010

have you checked redring website to see if their is a spare parts diagram for this model.
solenoid valve is usually held to the shower base by 2-4 screws but it sounds like your valve uses clips to hold it down. With care you should be able to release these clips and then ease out the solenoid valve. Work slowly and you will find how to release the valve.

garryk
March 2010