i have a mcculloch tm210 petrol strimmer which will not start,i have noticed that when you press the primer bubble it dose not come back out,can any body help.
Check your mixture I.E. 40/1 also use new fresh fuel. Check spark from plug. If all else
fails borrow neighbours.
treff
May 2013
also you might want to try pouring a little fuel into the carb itself to feed out any air in the engine.
cyborg
October 2010
The primer bulb pulls fuel from the carb and beack into the tank, if it does not return there is a fuel starvation issue in or to the carb, replace fuel filter in the tank, if no better replace the fuel screen in the carb under the pump cover
Husqvarna man
July 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
