re transfer to T.V?

As you left out the make of the camcorder this is from my Canon book.

This is from my Canon book: you will have to check with camera shop unless you have the leads and scart plug [scart plug only required if no Audio/Video sockets on TV but scart sockets see below].

For TV with scart socket and no audio/video
connections.

A:
Using adapter PC-A10 [scart plug]
Turn off camera and TV when making connections.
take the Audio/Video lead and plug into the scart adapter white to white, yellow to yellow. red to red. Plug in to camera. The input selector: If recording to TV set adapter to video if to a VCR set to Line. Switch on TV select video channel then switch on camera.

B:
If the TV has Audio/Video sockets On front or rear that take the cable plugs then just plug them in to TV.
Again red to red yellow to yellow white to white.

Switch on TV select video channel and switch on camera.


Now you camera may not be the same so you will need a lead with an end that fits YOUR camera.

Bob
September 2010