how do i replace the belt on my panasonic power brush mc-v9638?

First, the light bulb housing must come off. To do this, pull upward on the back of the housing. It also helps to push inward on one of the sides of the housing as you pull. It will unclip from the main cover. Next, remove the 2 screws you see in the center. Then, underneath the powerhead, where the black base plate meets the main cover, pull the cover to the side, away from the black plate, to release. You can release it from either side. Now that the cover is off, you can get to everything in the nozzle. Need help or parts? Email me at arctic@worldlynx.net

Help Around the House
July 2006