You can set everything on pedestal and when you hit start, nothing happens. Removed pedestal everything is connected, motor brushes look great with 5/16" still protruding from holders. Cleaned all the dust off of circuit board. I`m to the point where I think there is a Transister, SCR or Capacitor in motor circuit that is bad and maybe involved with the IC`s.
Remove control panel in front of you and unplug all wires and reinstall them one at a time. Also do the same where pwr board is as sometimes electrolysis forms on pins and etc. Make sure all plugs are connected.
Jay
February 2011
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
