how to service my ford transit 2002 swb mk6?

if you go to a motor factors,give them your reg no. and you will get the correct oil and filters,oil filter 36mm socket,just unscrew it,replace large `o`ring,press in filter to housing and refit,doesn`t need to be tight,just nip it up,air filter-remove clip holding intake hose,swing to side and unclip the two fasteners at front of filter box,lift up lid,fit new filter and refit lid and clips,fuel filter-unscrew black collar holding filter on,drop down filter,it may have a water sensor in base of filter,disconnect connector to it,refit water sensor to new filter,if you look at the neck of the filter it has three different size indents to fit into filter housing,you must get these into the correct position to refit collar,take note when you remove the old filter where they go,would also fill the filter with clean diesel and you shouldn`t have problems restarting the motor, sump plug-13mm socket,good luck

cdc
September 2011