no reset switch on that model iam afraid.most likely be a fault on either T/stats, or heating element failure.the T/stat fails on that model if you don't let the dryer finish its cycle.the last 10 seconds of the cycle blows cool, to cool the T/stat, and element.if you are opening the door before the dryer finishes its cycle then you are aborting this process.the heat builds up and trips the T/stat.if you have a multimeter check both stats and heating element for o/c open circuit.the T/stats are mounted on top of the heater assembly,this unit can be removed in one.if either stat is at fault I strongly suggest replacing both.if element has faild your new purchase will come with new stats fitted.as I mentioned it is all one unit.
ozone
November 2011
howtomendit.com for free repair help, information and advice.
